The recommended brake fluid is Honda DOT 3 or DOT 4 brake fluid from a sealed container, or an equivalent. Page 88 API service label Viscosity SAE 10W-30 JASO T 903 NOT RECOMMENDED standard Do not use non-detergent, vegetable, or castor based racing oils. Honda Motor Co.,Ltd. reserves the right to make changes at any time without notice and without incurring any obligation. And operating this scooter safely is an important responsibility. To help you make informed decisions about safety, we have provided operating procedures and other information on labels and in this manual.
Install a new bulb in the reverse order of removal. (1) Taillight lens (3) Bulb (2) Screws… Page 111 09/08/05 17:33:52 32KTGC00_111 Front Turn Signal Bulb The right and left turn signal bulbs replacement can be done in the same way. For some reason, there was a lot of purple and teal Dio’s sold, so you might have to look a bit harder to find a color you like. Honda Genuine Accessories that have been B e f o r e y o u c o n s i d e r m a k i n g a n y… Page 19 09/08/05 17:22:47 32KTGC00_019 Do not pull a trailer or sidecar with your Modifications scooter. Passing Light Control Switch ( ) When this switch is pressed, the headlight flashes on to signal approaching cars or when passing. Шестерни в редукторе, подсчёт зубьев и передаточное число. Removal: Remove the screws ( ). Release the hooks ( ), then remove the front cover.
Page 116 09/08/05 17:34:34 32KTGC00_116 Finishing Touches Removing Road Salt After washing your scooter, consider using Seawater can be found on the road near the a commercially-available spray cleaner/ seaside. Independent use of only the front or rear brake reduces stopping performance. Page 33 Worn pads should be replaced. If the pads are not worn, have your brake system inspected for leaks.